Steris Amsco 3085 SP, Руководство по обслуживанию

Страница: 40 / 228

5-3
Auxiliary Override Systems Operator Manual 150830-353
The toggle switches are used in conjunction with the foot pedal for table
movements when
no electric pump power is available.
Articulate table as follows:
1. Flip foot pedal down (see Figure 5-2).
2. Position toggle switches, as outlined in S
ECTION
5.1, A
RTICULATION
W
ITH
E
LECTRIC
P
UMP
P
OWER
A
VAILABLE
, for desired movement (or select movement with hand
or foot control).
3. Pump foot pedal manually (while still holding toggle switch [or hand or foot
control button/pedal] in position) until desired degree of movement is
obtained.
4. Stop pumping foot pedal and release toggle switch (or hand or foot control
button/pedal) to stop movement and lock in position.
5. Correct problem or have qualified service technician repair table before
further use.
A floor lock override switch is located inside the manual pump pedal recess (see
Figure 5-3). Flip the pedal down to access the switch (see Figure 5-2).
Operate the override system as follows:
•
If electric pump power is available: move the rocker switch down to
activate the UNLOCK function; release it when the floor locks are retracted
and the table is resting on its casters. To activate the LOCK function, move
the rocker switch up; release it when the table is resting on its floor locks (the
casters swing freely).
•
If NO electric pump power is available: move and hold the rocker
switch down to activate the UNLOCK function and operate the foot pump (or
have an assistant operate it) until the floor locks are retracted and the table
is resting on its casters. To activate the LOCK function, move and hold the
rocker switch up (or have an assistant operate it) until the table is resting on
its floor locks (the casters swing freely).
5.3 Floor Lock
Override Systems
Floor Lock
Override
Rocker
Switch
Foot Pedal
Figure 5-3. Floor Lock
Override Switch
5.2 Articulation With
No Electric Pump
Power Available
Foot Pedal
Figure 5-2. Foot Pedal