Steris Amsco 3085 SP, Руководство по обслуживанию

Страница: 133 / 228

i
764332-899
© 2010, STERIS Corporation All rights reserved. Printed in U.S.A.
A Word From STERIS Corporation
Thank you for choosing this fine STERIS product.
STERIS is committed to ensuring your continued
satisfaction. This manual illustrates and identifies
assemblies and components of the Amsco
®
3085 SP
Surgical Table. All personnel involved in the use and
maintenance of this equipment must carefully review
and comply with the
S
AFETY
P
RECAUTIONS
and
instructions contained in the M
AINTENANCE
I
NSTRUCTIONS
(P764332-898). Do not begin service of
this Surgical Table until you have become familiar
with this information.
GENERAL
Assemblies and components of the Amsco 3085 SP
Surgical Table are illustrated and identified on the
following pages. The part number, the description and
the quantity required for each usage are given. Each
indentation in the description represents the assembly
level. The
UNITS PER ASSEMBLY column is specific
for the given assembly or subassembly level.
HOW TO USE THE ILLUSTRATED PARTS
BREAKDOWN
1. Determine the function and application of the part
required. Examine the list of illustrations and select
the most appropriate title. Note the illustration page
number.
2. Turn to the page indicated and locate the desired part
on the illustration (see Example 1).
3. From the illustration, obtain the item number
assigned to the part desired. Refer to the
accompanying description for specific information
regarding the part (see Example 1).
4. The abbreviation A/R means “As Required” or
“Amount Required.”
5. The abbreviation SS means “Stainless Steel.”
SPECIAL INSTRUCTIONS
Table 1
provides part numbers and figure references
for the most commonly replaced items on an Amsco
3085 SP Surgical Table. This table is for quick reference
only. For a complete listing of parts, refer to the
appropriate Figure and associated Illustrated Parts
Breakdown (IPB) in this Section of the maintenance
manual.
IMPORTANT: A listing of the S
AFETY
P
RECAUTIONS
to be observed when operating and servicing
this equipment can be found in S
ECTION
1 of the Maintenance Instructions (P764332-898). Do not
operate or service the equipment until you have been trained on this information.
WARNING – PERSONAL INJURY AND/OR
EQUIPMENT DAMAGE HAZARD: Repairs
and adjustments to this equipment must be
made only by STERIS or STERIS-trained
service personnel. Maintenance performed by
unqualified personnel or installation of
unauthorized parts could cause personal
injury, result in improper equipment
performance, invalidate the warranty or result
in costly damage. Contact STERIS regarding
service options.
CAUTION – POSSIBLE EQUIPMENT
DAMAGE: To prevent voiding the warranty
or damaging the equipment, use only STERIS
replacement parts.