Steris Amsco 3085 SP, Руководство по обслуживанию

Страница: 34 / 228

4-11
Operating Instructions Operator Manual 150830-353
Alternately rotate ratchet in drive direction and free-return direction until
desired height is reached.
3. Flip ratchet handle back up into stored position when elevation adjustment
is complete.
Mattress pads are backed with hook fastener strips which fasten to companion
strips on the tabletop (see Figure 4-11).
Removable accessories are positioned and secured by clamps or sockets
which are applied to (and slide along) the side rails. Contact STERIS to order
additional table accessories.
4.6 Pads and
Accessories
WARNING – INSTABILITY
HAZARD: Possible patient or
user injury, as well as table or
accessory failure, may result
from using STERIS table ac-
cessories for other than their
stated purpose - or from us-
ing, on STERIS tables, ac-
cessories manufactured and
sold by other companies.
WARNING – PERSONAL
INJURY HAZARD: When in-
stalling any table accessory,
check for correct attachment
and tighten securely (if ap-
propriate). Do not use worn
or damaged accessory.
Check installation before us-
ing any accessory.
4.6.1 Tabletop Pads
1. To install tabletop pad, place pad in position and press hook fastener strips
together (see Figure 4-11).
2. To remove, “peel” away from tabletop.
A four-section X-ray top accessory is available from STERIS for use with Amsco
3085 SP tables (see Figure 4-12). Each of the top sections has two types of
standoff spacers. The shorter spacers rest on the tabletop; the longer, spring-
loaded spacers (which secure the X-ray top) fit into tabletop mounting holes. The
position of the longer spacers must be adjusted for the table which is to receive
the X-ray top.
4.6.2 X-ray Top Accessory
Figure 4-11. Tabletop Pads
Figure 4-12. X-ray Top Sections
Back Section
Seat Section
Head Section
Leg Section
TREN D HEIG
HT SIDE TILT
BACK LEG
Pad
Hook Fastener
Strips