manualshive.com logo in svg

Stentorfield Viision 2000 Range, Руководство по программированию

Поделиться
Скачать
Stentorfield Viision 2000 Range Скачать руководство пользователя страница 24

2.

Water Stop To Whipper Stop Delay
The water stop to whipper stop delay defines the length of time that the whipper

will continue to run after the water valve has closed.This ensures that the whipper
operates whenever there is water in the mixing bowl.

3.

Flush Time
This setting is the period of time that a valve is opened during a flush cycle. It is

generally set slightly higher than the period set for a vend to ensure that the
mixing bowl is filled further than during a vend. Care should be taken to ensure
that the period set does not cause the bowl to overflow.

12. Drink Disable Sub-Program

This sub-program allows drinks to be either enabled or disabled.The following example
illustrates the sequence required to disable chocolate.

1.

Enter the drink disable sub-program and scroll up or down using the appropriate
arrow key until the message on the LCD display reads:

2.

Press the access key.The message on the display will now read:

3.

Press the access key again.The drink is now disabled.

13. Canister Configuration Sub-Program - Vision 300 & 400 Only

This sub-program allows the ingredient which is to be used in each canister to be
selected. Because Vision 400 machines may be fitted with up to four canisters, there
are four canisters to be allocated in the sub-program.The canisters are numbered one
to four with canister one being the right hand canister when viewing the machine from
the front with the door open.

All canister positions must be allocated even if a canister is not fitted to that particular
station. In this case the canister position should be set to “not used” in the sub-
program. If one of the canisters is allocated “Espresso Coffee”, the machine will use
Espresso Coffee to make Cappuccino, Espresso and Espressochoc drinks. If no Espresso
Coffee is allocated, these drink selections will be made with ordinary coffee.

14. Machine Type Sub-Program - Vision 300 & 400 Only

This sub-program allows Vision 300 and 400 machines to be configured to dispense

Programming Manual

22

CHOCOLATE
= ENABLED

CHOCOLATE
> ENABLED

Содержание Viision 2000 Range





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды