Stentorfield Viision 2000 Range, Руководство по программированию

Страница: 12 / 36

3. Tariff 2:
Prices set in the tariff 2 price sub-program.
4. Tariff 0:
Sets the machine into free vend.
The machine is factory set so that no alternative prices are available (i.e. the normal
tariff is permanently in force). To change the tariff period for Vision 300 and 400
machines, proceed as follows:-
1. On entry into this sub-program the display will show the message:
2. This is an empty price period. To enter a price period (in this example we shall
use 10:30 - 15:45,Tariff 2,Weekends), press access.The display will now read:
3. Enter a four digit number for the start time in hours and minutes.To correct any
entry errors, press cancel to delete the last digit entered.
Note: Pressing cancel with no digits displayed will exit to the Operators program.
4. Once the start time has been correctly entered press access. The display will
show:
5. Enter the finish time and press the access key.The display will now show:
6. To set the tariff period, enter a number between 0 and 2, or use the up and down
keys followed by access.The message will change to:
7. Using the up and down keys, index the day setting between “Every day”,
Programming Manual
10
PERIOD 10:30 - 00:00
PERIOD 10:30 - 15:45
TARIFF > 0
PERIOD 10:30 - 15:45
TARIFF 2 > EVERYDAY
P1 = 00:00 - 00:00
TARIFF - EVERY DAY
START > 00:00