manualshive.com logo in svg

Stentorfield Viision 2000 Range, Руководство по программированию

Поделиться
Скачать
Stentorfield Viision 2000 Range Скачать руководство пользователя страница 14

3.

These counters can be reset by the “reset counters” switch.

8.

Time / Date Sub-Program

This sub-program allows the time, date and day to be altered if necessary.The date is
programmed for leap-year roll-over and should not require adjustment. However, the
time has not been programmed with BST/GMT changeover.This enables the machine
to be used in countries other than the UK.

Note: The method of programming the date and time program for machines with 4

selection buttons is different to machines with 9 and 12 selection buttons.The
following examples describe the correct methods for programming both
machines.

To set the time and date on machines with 4 selection buttons, proceed as follows:

The time is entered in 24 hour format. In this example it is assumed that a time of
07:58 am is to be entered.

1.

Enter the time/date sub-program. Press the access key until 00:00 is displayed.

Press button 1.The display will read:

2.

Using the up/down arrows, scroll through until the display shows:

3.

Press button 1. The display will read 01:00. Using the up/down arrows, scroll

through until the display shows:

4.

Press button 1. The display will read 07:10. Using the up/down arrows, scroll

through until the display shows:

5.

Press button 1. The display will read 07:51. Using the up/down arrows, scroll

through until the display shows:

Programming Manual

12

10:00

00:00

07:00

07:50

07:58

Содержание Viision 2000 Range





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды