Stentorfield Viision 2000 Range, Руководство по программированию

Страница: 16 / 36

8. Press button 1. The display will read 25:04:01. Using the up/down arrows, scroll
through until the display shows:
9. Press access key to set the date and exit from the program.
To set the time and date on machines with 9 and 12 selection buttons, proceed as
follows:
1. The time / date sub-program displays the time, date and day of the week. The
up and down arrows are used for viewing the three different messages.
2. To view the time, enter the time / date sub-program.The display will show:
Where xx:xx is the current time.
3. To change the time shown, press the access key.The display will now show:
4. The time is entered in twenty-four hour format. Enter the correct 4 digit number
for the time in hours and minutes. When correct, press the access key. The time
is now set.
5. To view the date press the up or down arrow until the display reads:
Where xx:xx:xx is the current date (Day, Month,Year).
6. To change the date press the access key.The display will show:
7. Enter the date using the sequence, day, month, year. When the correct date has
been entered press the access key.The correct date is now set.
Programming Manual
14
TIME = XX:XX
TIME = XX:XX
SET TIME > 00:00
DATE = XX:XX:XX
DATE = XX:XX:XX
SET DATE > 00:00:00
25:04:02