WWW.STEMMER-IMAGING.COM
PP8xx LED Controller - User Manual
On the general setup page (shown on the previous page), you can set a
password for the PP82x and send it commands. Refer to
Section 10,
Command configuration
for the commands you can use to operate the
PP82x. You can also set up the trigger mode and turn the internal trigger
on or off.
9.3
Configuration page
The configuration page allows you to set up the lighting parameters.
You can set the mode (continuous, pulsed, or switched), the light's
brightness and pulse settings. You must click the
Submit
button to effect
any changes you make.
The configuration page for Channel 0 is shown below:
—
28
—
WWW.STEMMER-IMAGING.COM
