042D07_INS0616
8
Ambient temperature
The temperature is displayed either in °C with a 0.5 °C resolution or in °F with a 1 °F resolution.
The screen will display LO if the temperature drops below 0 °C (32 °F) and will display HI if the
temperature rises above 50 °C (122 °F).
Temperature setpoints
The setpoint may be edited by the user using the UP and DOWN buttons located on the thermostat.
The setpoint may also be modified through the ZigBee network.
The minimum setpoint is 5 °C (41 °F) and the maximum setpoint is 30 °C (86 °F).
NOTE:
if the setpoint is set at 7 °C (45 °F) or below, the frost warning icon will be displayed to
warn the user that water pipes might be subject to freezing.
Heating power indicator
Whenever the thermostat is actively heating the room, the heating status graph will display the
heating percentage.
No bar: 0%
1 bar: 1-25%
2 bars: 26-50%
3 bars: 51-75%
4 bars: 76-100%
Thermostat mode
The thermostat has three modes: Comfort, Eco and Off. The first two modes have their own
preestablished setpoint. Comfort: 21 °C (70 °F), Eco (
): 17 °C (63 °F).
The user may change the setpoint to any value in the range described in the setpoint section.
When the Eco mode is active, the Eco icon (
) is displayed on the LCD. When the Off mode
is active, the frost warning icon is displayed on the LCD and the setpoint is replaced by ( -- ).
The thermostat mode may be changed locally on the thermostat by pressing the UP and DOWN
buttons simultaneously for less than 3 seconds while on the main screen. The Eco setpoint is local
to the thermostat and cannot be edited through the ZigBee network.
If a setpoint change is sent through the ZigBee network, the thermostat mode will automatically
switch to Comfort mode.
