042D07_INS0616
3
This thermostat is designed to control baseboard, convector and fan-forced heaters. It may be
associated to a ZigBee network.
This thermostat is
NOT
compatible with the following installations
• Inductive load
• Central heating system
• Heating load outside the specified ratings (refer to the Technical Specifications section)
Parts supplied
• one (1) thermostat
• one (1) wall mounting plate located at the back of the thermostat
• two (2) mounting screws
• two (2) solderless connectors suitable for copper wires
Selection of the thermostat location
The thermostat must be mounted to a connection box on a wall facing the heating unit, at around 1.5 m
(5 feet) above the floor level, on a section of the wall exempt from pipes or air ducts.
Do not install the thermostat in a location where temperature measurements could be altered. For
example:
• close to a window, on an external wall, or close to a door leading outside
• exposed directly to the light or heat of the sun, a lamp, a fireplace or any other heat source
• close to or in front of an air outlet
• close to concealed ducts or a chimney
• in a location with poor air flow (e.g. behind a door) or with frequent air drafts (e.g. head of stairs)
DESCRIPTION
INSTALLATION
