-
7
-
-
7
-
WHERE TO INSTALL YOUR MAESTRO CONTROLLER
•
THERMOSTAT
The controller
•
thermostat allows you to control the other MAESTRO thermostats in your home. Install it in a room that is
central, for example the main living area of your home, where it will be easily accessible. Since the controller
•
thermostat also
serves as a thermostat, it will control the temperature of this room.
You must install the controller
•
thermostat at approximately 1.5 m (5 ft.) from the floor, on an indoor wall that faces the heating
system. The controller
•
thermostat must be mounted on an electrical box.
ATTENTION :
To avoid any risk of overheating, leave a clearance of at least 30 cm (12 in.) around the controller
•
thermostat to
ensure proper ventilation. Also, the front of the unit should be completely clear of any obstruction to ensure optimal functio-
nality. For example, do not install the controller
•
thermostat behind curtains or furniture.
To avoid getting false temperature measurements, do not install the controller
•
thermostat in any of the following locations:
•
Near a window or close to a door leading outside
•
In an area exposed directly to the light or heat of the sun, a lamp, a fireplace or any other heat source
•
Near an air outlet
•
Near concealed ducts or a chimney
•
Where there is poor air flow (e.g. behind a door)
•
Where there is a high concentration of dust
•
Where there are frequent air drafts (e.g. top of stairs)
1.5 m
