30
20
16
SETUP
The first time you start the thermostat, set up the three basic preferences. The thermostat will
display temperature format and heating mode options and Lobby mode options if the heating
mode is set to Fan Heater. You must also set up the Zigbee connection if you want to connect
your thermostat to an Allia hub. Install all your thermostats before connecting them to the hub.
HEATING MODE
The heating mode corresponds to the type of heating system that the thermostat
controls: baseboard/convector or fan heater.
1 -
Go to menu 30.
2 -
Use the
buttons to select baseboard/convector mode
(OFF) or fan heater mode (ON).
3 -
Press the central button
to confirm the selection.
When fan heater mode is selected, the
icon is displayed
on the thermostat’s home screen.
TEMPERATURE DISPLAY UNIT
By default, the temperature is displayed in degrees Celsius.
You can also display the temperature in degrees Fahrenheit.
1 -
Go to menu 20.
2 -
Use the
buttons to select °C or °F.
3 -
Press the central button
to confirm the selection.
