13
TECHNICAL MENUS
MENU T1
|
THERMOSTAT VERSION
MENU T2
|
ZIGBEE VERSION
MENU T3
|
THERMOSTAT CONTROL CODE
MENU I00 TO I17
|
ZIGBEE INSTALLATION CODE
MENU A0 TO A7
|
MAC ADDRESS
NAVIGATING THE TECHNICAL MENUS
Access the technical menus from the home screen by pressing the central button
for ten (10) seconds.
After three (3) seconds, the advanced menus will be displayed (menu 10). Continue to press the button until the
technical menus appear.
ADJUSTING THE SETPOINT TEMPERATURE
By default, the setpoint temperature is set to 70°F. To change the setpoint temperature,
use the
buttons on the home screen.
The button will increase the setpoint temperature 1°F at a time.
The button will lower the setpoint temperature by 1°F at a time.
If the thermostat needs to activate the heating system to reach the setpoint temperature,
the
icon will indicate the intensity at which the heating system is operating.
The thermostat keypad must be unlocked (the
icon will not appear on the screen).
If the thermostat is part of the Allia ecosystem, the temperature will adjust automatically if a scene or program for this
thermostat launches.
