INS_RENEW INS Rev E
Page 37
H. SMART THERMOSTAT (TRANSMITTER OPERATION)
15 - REMOTE CONTROL OPERATION
Figure 15H.1
The Smart Thermostat function adjusts
the flame height in accordance with
the difference between the set point
temperature and the actual room
temperatures.
As the room temperature gets closer to the
set point the Smart Function will modulate
the flame down.
To activate this function, press the
THERMOSTAT key (Figure 15A.1) until the
word “SMART” appears to the right of the
temperature bulb graphic.
(Figure 15H.1)
To adjust the set temperature, press the UP
or DOWN ARROW keys until the desired
set temperature is displayed on the LCD
screen of the Transmitter. (Figure 15H.2)
Figure 15H.2
I. FAN SPEED CONTROL
Figure 15I.1
The speed of the fan can be controlled by
the Proflame system.
The fan speed can be adjusted through six
(6) speeds.
To activate this function, use the MODE
key (Figure 15A.1) to index to the fan
control icon. (Figure 15I.1)
Use the UP/DOWN ARROW keys to turn
on, off or adjust fan speed. (Figure 15I.2)
A single “beep” will confirm reception of the
command.
Figure 15I.2
NOTE: When Smart Thermostat is activated, the manual flame height adjustment is disabled.
