INS_RENEW INS Rev E
Page 22
B. SM-INS LOG SET INSTALLATION - Steps 3 & 4
13 - LOG INSTALLATION (SM-INS)
Step 3 - Log 2
Figure 14C.1
Log 2 - View 1
Log 2 - View 2
Figure 13B.3
2
2
Place Log 2 over Log 1. The hole in the bottom of Log 2
matches the pin molded into the top of Log 1. The flat side
of Log 2 rests on the flat part of Tab 2 (and pulled forward)
and Tab 1 that is attached to the back wall. Refer to Figure
13B.1 on Page 21 for Tab placement.
Log Part Number: SMINS-Log 2
Step 4- Log 3
Figure 14C.1
Log 3 - View 1
Log 3 - View 2
Log Part Number: SMINS-Log 3
Figure 13B.4
3
Place Log 3 over Log 1. The hole in the bottom of Log 3
matches the pin molded into the top of Log 1. The left end fits
between the grate and the left fireplace wall.
Tab 2
