![Stellar Hearth Products 3-RD-2-GL Скачать руководство пользователя страница 46](http://html1.mh-extra.com/html/stellar-hearth-products/3-rd-2-gl/3-rd-2-gl_installation-and-operating-manual_1371587046.webp)
Page 46
INSTALL_3-RD-GL-R REV A
11 - FINISHING
REFER TO SECTION 6 - MANTEL REQUIREMENTS
12 - LIGHTING & SHUTDOWN
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS AND LIQUIDS IN THE
VICINITY OF THIS
OR ANY OTHER APPLIANCE
FOR YOUR SAFETY - READ BEFORE LIGHTING
D
UE TO HIGH SURFACE TEMPERATURES, KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
This appliance needs fresh air for safe operation and must be installed so there are provisions for adequate combustion and ventilation
air. It is important to make sure the termination cap remains unobstructed at all times from snow, ice, leaves or other debris.
•
This fireplace is equipped with an ignition device
which automatically lights the pilot and main burner.
The pilot and burner light automatically with the wall
switch. DO NOT try to light the pilot by hand. Before
lighting this fireplace, follow these instructions exactly.
•
BEFORE LIGHTING, smell all around the appliance
for gas. Be sure to smell next to the floor because
some gas is heavier than air and will settle on the floor.
•
Do not use this appliance if any part has been under
water. Immediately call a qualified service technician
to inspect the appliance and to replace any part of
the control system which has been under water.
WHAT TO DO IF YOU SMELL GAS:
•
Do not touch any electrical switches
•
Do not try to light any appliance
•
Do not use the phone in your building
•
Immediately call your gas supplier from a neighbor’s
phone
•
Follow the gas supplier’s instructions
•
If you cannot reach your gas supplier, call the fire
department
STOP: IF YOU DO NOT FOLLOW THESE INSTRUCTIONS EXACTLY, A FIRE OR EXPLOSION MAY RESULT, CAUSING
PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
NOTE: A PAINT SMELL WILL OCCUR DURING THE FIRST FEW HOURS OF BURNING.
NOTE: THIS FIREPLACE MAY PRODUCE NOISES OF VARYING DEGREE AS IT HEATS AND COOLS DUE TO METAL
EXPANSION AND CONTRACTION. THIS IS NORMAL AND DOES NOT AFFECT THE PERFORMANCE OR LONGEVITY OF THE
FIREPLACE.
STOP! Read safety information on previous page and front cover of this manual before continuing.
NOTE: This fireplace is equipped with an ignition device which automatically lights the pilot.
DO NOT try to light the pilot by hand.
CAUTION: If fireplace will not operate, follow instructions TURNING OFF GAS TO FIREPLACE and call your service technician
or the gas supplier.
NOTE: When fireplace is initially lit, condensation will appear on the glass; this is normal in all gas fireplaces and will
disappear after several minutes.
A. LIGHTING THE FIREPLACE - SEQUENCE OF EVENTS