Stel SKY-MIG 353K, Инструкция по эксплуатации

Страница: 13 / 45

6935200020
13
- Position the machine in such a way that there is
no obstacle to the air circulation ensured by the
internal fan since the internal components require
suitable cooling.
- Ensure that the fan does not send deposits or
dust into the machine.
- Avoid impacts, rubbing, and – absolutely no
exposure to dripping water, excessive heat
sources, or any abnormal situations.
MAINS VOLTAGE
The machine operates from a mains voltages
differing by +/-10% from the rated mains value
(example: 400V rated, Minimum voltage 360V,
maximum voltage 440V).
SKY-MIG 353 S/K
16 A Fuse
SKY-MIG 453 S/K 32 A Fuse
SKY-MIG 553 S 40 A Fuse
CONNECTION
- Before making the electrical connections between
the welding machine and the line switch, ensure
that the switch is turned off .
- The distribution panel must comply with the
regulations in force in the country of use.
- The mains system must be of the industrial type.
- For longer connecting cables, increase the lead
section as required.
- When using long extension cables, the cable core
diameter size is relevant to the machine
requirements for achieving optimum performance.-
- The power input supply socket from the mains
voltage supply, must have a suitable switch
provided together with a 'slow-burning' type
fuse(s).
- In the event of damage to the power cable,
replacement or repair must be performed by a
qualified person at an approved service centre.
EARTHING
- To ensure user protection the welding machine
must absolutely be correctly connected to the earth
system
(INTERNATIONAL SAFETY
REGULATIONS).
- It is indispensable to provide good earthing by
means of the yellow-green lead in the power cable,
in order to avoid discharges due to accidental
contacts with earthed objects .
- The chassis (which is conductive) is electrically
connected with the earth lead; if the equipment is
not suitably connected to earth it may cause
electric shocks which are dangerous for the user.
LIFTING
WARNING :
SKY-MIG 353K weight 87kg / 191lbs
SKY-MIG 453K weight 105kg / 231lbs
SKY-MIG 353S + TOP 304TS weight 128kg / 282lbs
SKY-MIG 453S + TOP 304TS weight 128kg / 282lbs
SKY-MIG 553S + TOP 504TS weight 155kg / 341lbs
TOP 304/504TS weight 15Kg / 33lbs
Lifting by hand: (only for wire feeder)
Lift the machine using the two handles provided
.
Lifting with hoist and strap
Lift the machine by using ONLY both handles as
shown on the picture.
Keep the machine as horizontal as possible
INSTRUCTION FOR
INSECURE POSITIONING
Failure to properly secure the machine can cause
personal injury. If machine is in an insecure
position do not attempt to switch on. Do not put the
machine on an unlevelled surface greater than 10°.