Speaker Configuration
The
Speaker Configuration
menu provides information about the current speaker channel
configuration, allowing you to select a configuration that is either stored on the Model P1, on a laptop,
or on a connected memory stick. Upload the desired configuration to the Model P1 and verify the
setup.
Press the down button on the Installer remote to highlight
Select Setup
and press
OK
. If using the
Web installation tool, click
Change Speaker Configuration
. Press the right button to be able to
select the location of the setup to be loaded and press the up or down buttons to browse the available
locations. Press
OK
to confirm your selection.
In the Web interface, click
Select Configuration Location
to browse locations and click the relevant
location in the list. Press the down button to highlight
Select Setup
and press
OK
. Press the up or
down button to select a configuration from the list and press
OK
to confirm your selection. In the Web
interface, click the down arrow next to
Select Speaker Configuration
to view the available
configurations and click
Use this setup
to select a configuration.
19
