6
TERRA
RAKE
SAFETY / SAFETY DECALS
OPERATION SAFETY
•
Do not attempt to work on the Terra Rake while the power unit engine is running.
•
Inspect machine before operation. Repair or replace any damaged, worn, or missing parts. Be sure
guards and shields are in proper working condition and are secured in place. Make all necessary
adjustments before operating machine.
•
Alterations or modifications to this machine can reduce safety and could cause damage to the machine.
•
Before each use, verify that all controls function properly and inspect all safety devices. Do not operate if
controls or safety devices are not in proper working condition.
•
Make sure all hydraulic connections are tight and all hydraulic hoses and tubes are in good condition.
Repair any leaks and replace any damaged or deteriorated hoses or tubes before starting the machine.
•
Hydraulic leaks can occur under high pressure. Hydraulic leaks require special care and attention. Use
a piece of cardboard and a magnifying glass to locate sus pected hydraulic leaks. Keep body and hands
away from pinhole leaks or nozzles that eject high pressure hydraulic fluid. Hydraulic fluid escaping
under high pressure can penetrate the skin causing serious injury, leading to severe complications and/
or secondary infections if left untreated. If hydraulic fluid is injected into the skin, seek immediate medical
attention
•
The Terra Rake hydraulic system may contain stored energy. Before performing maintenance or repairs
on the attachment, lower attachment to the ground, shut off power unit engine, put hydraulic accessory
lever in float to relieve hydraulic pressure, and disconnect hydraulic hoses from the auxiliary quick
connectors.
•
Ensure the Terra Rake is fastened securely to the power unit before operating.
•
Never leave the operator’s seat without lowering the attachment to the ground, setting the parking
brake, shutting off the engine, and removing the ignition key. Make sure all moving parts have come to a
complete stop before dismounting.
•
Do not attempt to straighten bent tines. Bending a tine may cause it to break.
•
Do not use the TR270 for digging or moving large amounts of material. The TR270 is designed for
finishing work. Overly aggressive contact with the ground, aggregate, rocks, and other debris can cause
damage to the Terra Rank including bent or broken tines.
•
Know the work area well before operation. Do not operate where traction or stability is questionable.
Содержание TR270 TERRA
