10
TERRA
RAKE
CASTER ARM PLACEMENT
• Mounting the caster arms to the inside will
make maneuvering next to barriers easier.
in this position, the footprint is narrower and
the ends may dig in harder when operating
around a mound or ridge.
• Mounting the caster arms to the outside will
assist in creating a more level surface.
• Mounting the caster arms to the rear will
allow the rake to set the grade and follow
the raked surface. The rake will dig in as it
approaches inclines. The caster arms must
be mounted to the outside to prevent hitch
frame contact.
• Removing the caster arms requires tine
depth to be set using the auxiliary controls.
Removing the caster arms may produce a
more uneven surface. Removing caster
arms may be useful for clearing large loose
debris and working in rough areas where
caster arms may be unsuitable.
ROTATION ADJUSTMENT
•
Rotate the rake to the right or left to direct material and create windrows of debris.
•
If desired, reverse auxiliary hydraulic hoses to reverse control operation.
ADJUSTMENTS
Содержание TR270 TERRA
