Steiner TR270 TERRA, Руководство оператора и каталог запасных частей

Страница: 5 / 24

5
TERRA
RAKE
SAFETY
GENERAL SAFETY
Read the Operation & Safety Manual
• The owner of this machine is solely responsible for properly training the operators.
• The owner/operator is solely responsible for the operation of this machine and prevention of accidents or
injuries occurring to him/her self, other people, or property.
•
Read and understand the operator’s manual, before attempting to operate this machine.
• Operate all controls from the operator’s seat.
• If the operator of the machine cannot understand this manual, then it is the responsibility of this machine’s
owner to fully explain the material within this manual to the operator.
• Learn and understand the use of all controls.
•
Know how to stop the power unit and all attachments quickly in the event of an emergency.
• Do not leave machine unattended while it is running. STOP the engine and remove the key, set parking
brake and lower attachment.
• Always park the machine on level ground.
• Do not allow minors, untrained personnel or the inexperienced to operate this machine.
•
Children are attracted to machine activity. Be aware of children and do not allow them in the working area.
Turn off the machine if a child enters the work area.
• Do not operate or repair machine if you are not in good physical and mental health, if you will be
distracted by personal devices, or are under the influence of any substance which might impair deci sion,
dexterity, or judgment.
• Keep people and pets a safe distance away while using this machine. Injury could result from flying
debris. Stop machine if someone enters the work area.
• Wear protective clothing and personal safety devices to protect your head, eyes, ears, hands, and feet.
•
Always be alert to what is happening around you, but do not lose focus on the task you are performing.
• Always look in the direction the machine is moving.
• Stop operation immediately at any sign of equipment failure. An unusual noise or vibration can be a
warning of equipment failure or a sign that maintenance is required. Make all necessary repairs before
operating machine again.
• Only operate in well-lit conditions.