7
TURF UNIT
CAB
ASSEMBLY INSTRUCTIONS
7.
Install the rear side panels D aligning the 3
bottom holes with the bottom holes of the roll bar.
Fasten using the (6) bolts remaining from the roll
bar installation.
8.
Position the roll bar supports C with the slots at
the top of the side panels D and fasten with a
3/8 X 3/4 flange bolt and flange nut.
9.
Install door hinge pins E to rear side panels by
inserting pin in top hole until punched holes line
up. Bolt together using 5/16 X 3/4 flange bolts
and flange nuts.
10. Cut and place self—adhesive foam strips F on
the flanges of the front lower panels.