6
TURF UNIT
CAB
ASSEMBLY INSTRUCTIONS
1.
Have a ROPS approved roll bar and seat belt
mounted to your tractor, using the roll bar
instructions.
NOTE: Cab mounting uses 3 roll bar mounting
bolts A on each side as shown.
2.
Disconnect battery.
3.
Open the hardware package and sort the bolts
and nuts according to size.
4.
Facing the dashboard, remove the 3/8 flange
bolts B at the top of the side panels, one from
each side. (Model 230 only; Model 220 needs
holes drilled in the dash. Refer to Step 11.)
5.
Do not completely tighten bolts in Steps 5-20.
Cab will be aligned in Step 23.
6.
Assemble the cab roll bar supports C using (4)
3/8 X 3" bolts. Place a 3/8 flat washer on each
end of the bolt and loosely tighten with 3/8 nuts
and lockwashers. Position the bracket so the
closed end is facing to the side and away from
the tractor as shown.
