11
TURF UNIT
CAB
ASSEMBLY INSTRUCTIONS
17. Place the roof section down over rear side, rear
window panels and front window panel as shown.
Fasten with 5/16 X 1/2 flange bolts and nuts. Do
not tighten at this time.
18. Mark and drill a 13/32" hole at location P through
the remaining hole in the lower front panel and
fasten to the fender with a 5/16 X 1/2 bolt.
19. Mount door hinges Q on doors as shown using
5/16 X 3/4 flange bolts, 1/4 flat washers and
5/16 flange nuts. You may want to tighten these
bolts now, then loosen them later for adjustment.
20. Mount door on hinges.
