8
STEINDORFF
®
2.2.6.
Installing the stage inserted plate (Figure 9)
1.
When using the glass stage
①
, there is no special
requirement, you just need to place it in a plane.
2.
Install the stage inserted plate on to the stage opening.
Turn the disk, let the V nick to face user, so the recognition
of the objective will become easier.
2.2.7.
Installing the eyepiece (Figure 10)
1.
Remove the cap of the eyepiece tube
①
.
2.
Insert the eyepiece into tube until they are against.
2.2.8.
Installing the color filters (Figure 11)
Be sure the color filter cools down completely before you
change them. Take down the filter holder
①
, then install
the color filters
②
you need.
Mount the color filter downwards like
③
shown, keep it
horizontal through the end, not allow inclined.
If the color filter is inclined or not get to the end
④
, it will
drop possibly.
The color filter could be piled on the holder, so you can
install more than one filter according the needs if you can
ensure the whole thickness is less than 11mm.
Figure 9
Figure 10
Figure 11
