7
STEINDORFF
®
2.2.4.
Installing the objective (Figure 6 and Figure 7)
1.
Turning the coarse fusing knob
①
like the figure shows till
the nosepiece get to its lowest position.
For ensuring the safety of the instruction on
transportation, the nosepiece is located in the lowest
position and the tension adjustment collar
②
is
adjusted in an appropriate tight tension while
leaving the factory.
2.
Screw the lowest magnification objective on to the turret
from the nearside, then turn the turret clockwise, mount
other objectives according the magnification sequence of
low to high.
Mount objective like this way will make the change of
magnification to be very easy in using.
It also can install the objective through the stage opening.
2.2.5.
Installing the stage lengthen splint and the mechanical
ruler (Figure 8)
Stage lengthen splint can be installed in either side of the stage
to enlarge the work surface. But you can’t install the
mechanical ruler together.
Generally, the mechanical ruler will be installed in the right
side for comfortable adjustment.
1.
Installing the stage lengthen splint
First, Screw the fixed bolt
①
on to the splint , then mount
it on to the stage from right or left below, screwing down it
until it stay hard.
2.
Installing the mechanical ruler
Please install the ruler like the way of the stage splint.
Figure 6
Figure 7
Figure 8