STEIN Automation 300 SoftMove, Руководство по эксплуатации

Страница: 19 / 66

STEIN300 SoftMove_Stop Devices_08_GB.doc / 10.2018 19
7.4 Installing the stop devices and centring rails
The installation of the stop device for this model is the same as described under 7.3 In-
stalling the stop device.
In addition, both centring rails must also be installed on the inside of the belt elements to
the guide profile.
WARNING
The position of both centring rails depends on the position of the stop device and the
dimensions of the pallet. Please see the representation in Chapter 5.1.
Fig. 7-2:
Centring rails
1 Centring rail
2 Fixing screws

To change the position of previously installed stop devices, unscrew the two fixing
screws (2) with a wrench.

Turn each of the screws one full turn counterclockwise with the wrench.
This ensures the required twisting of the groove nuts when tightening the centring
rail.

When the centring rail is in the right position, tighten both screws (clockwise). In this
process ensure that the groove nuts twist correctly.
2
1