STEIN Automation 300 SoftMove, Руководство по эксплуатации

Страница: 14 / 66

14 STEIN300 SoftMove_Stop Devices_08_GB.doc / 10.2018
5 Stop situations
The installing sets shown under the heading "Stop situations" facilitate the pallet’s stop-
ping at a manual or automatic workstation in order to, for instance, carry out configura-
tions or installation work on the workpiece.
The sets are always composed of various accessory parts depending on customer-
specific control elements (e.g. electric or pneumatic foot switches to stop or release the
pallets).
The following diagrams show the maximum configuration of the stop situation.
Please the documents specific to the order for the actual configuration.
5.1 Stop device for workstations
Design of a standard stop situation (stop position).
Fig. 5-1:
Stop position
1 Workstation stop de-
vice
2 Workstation (ws) pre-
stop device
3 Read head
4 Surface switch
(optional)
5 Centring rails
6 Pallet on the ws stop
device
7 Pallet on the ws pre-
stop device
8 Free space behind the
processing position
WARNING
To permit the reliable functioning of the logistics, it is essential to maintain the prescribed
allocation of read head and stop position.
The read head must be positioned so that only the pallet which is in the processing posi-
tion at the workstation stop device is read. The code carrier from the subsequent pallets
must only pass over the read head once it enters the processing position.
6
1
2
3
4
5
7
8