D1
- 5 -
D1 9/2011
Operators Manual for Drilling Machine
OPERATING INSTRUCTIONS
(BEFORE YOU BEGIN)
Remove all contents from packaging and inspect to ensure no damage was incurred during shipping.
Your SM-D1 package should include the following:
3. STANDARD EQUIPMENT
The D1 comes in a set which consists of:
metal box
1 pc
drilling machine
1 pc
cooling system
1 pc
4 mm Allen wrench
1 pc
spoke handles
3 pcs
safety chain with snap hook
1 pc
operator’s manual
1 pc
chip guard
1 pc
4. GENERAL SAFETY ADVICE
The D1 drilling machine must not be used when:
1. The operator has not read the Operator’s Manual.
2. The work to be done is not in agreement with the recommendations in this
Manual.
3. Drilling machine is not complete or has been repaired with non-original parts.
4. Power supply parameters do not conform to those stated on the motor’s plate.
5. Machines operator has not checked condition of the drilling machine, condition of
power cable, control panel or cutter.
6. Power supply socket is not equipped with a protection circuit.
7. Machine is not secured with safety chain as a protection from falling down,
especially when used at heights or in vertical or upside-down positions.
8. Bystanders are present in the immediate vicinity of machine.
Important rules of safe use of drilling machine
1)
Before attempting to work with the machine check condition of power cord and
plug.
2)
The drilling machine should be connected to an installation equipped with
protection circuit (neutral or ground) and protected with a 16 A fuse for 220V
