Page 26 of 38
939564909 Rev B
®
Series 8 Table Assembly (cont.)
3
2
Carefully turn the table over (2 person
operation).
NOTE:
Do NOT use either lifting column as
a brace when turning the table over, as this
may cause binding. The top must be lifted
free, rotated, and set down carefully.
After the table is in place, install the 120v plug
into the control box. Secure the cord to the
control box using the molded-in strain relief.
Plug the cord into a modern electrical outlet,
with reference to the polarized plug instructions
on page 2.
3
Route all cables through wire managers.
4
Keep all cables clear of moving parts!
Finishing the Table Assembly
2
Double-check that all nuts, bolts, screws, cap
1
nuts and set screws are securely attached.
CONTROL
BOX
PLUG
STRAIN RELIEF
NOTE:
For best results, route
all cables carefully and neatly.
ROTATE UNIT END OVER END TO AVOID
DAMAGE TO THE CONTROLLERS.
