Page 10 of 38
939564909 Rev B
®
Driveshafts are retained using cap nuts, which
Installing Driveshafts
Tables require one cap nut mounted outside of
each lifting column. The driveshaft assembly is
grip the driveshaft ends and prevent them from
backing out of the lifting columns.
thus retained in both directions.
CAP NUT
(with plastic cover)
Place cap nut on a flat, hard surface and push
driveshaft into it.
1
1
With lifting columns pushed all the way down, feed
2
driveshaft through each lifting column, from outside,
until cap nut bottoms out on each lifting column.
2
Series 5 Table Assembly (cont.)
CAP
NUT
CAP
NUT
FINISHED ASSEMBLY
