Page 13 of 46
939564902 Rev F
®
Driveshafts are retained using cap nuts, which
Installing Driveshafts
Tables require one cap nut mounted outside of
each lifting column. The driveshaft assembly is
grip the driveshaft ends and prevent them from
backing out of the lifting columns.
thus retained in both directions.
CAP NUT
(with plastic cover)
CAP
NUT
CAP
NUT
FINISHED ASSEMBLY
Place cap nut on a flat, hard surface and push driveshaft into it.
1
1
With lifting columns pushed all the way down, feed driveshaft
through each lifting column from outside, until cap nut bottoms
out on each column.
2
2
Series 5 Bench Assembly (cont.)
