background image

HEIGHT ADJUSTMENT CONTROLLERS

For a visual demonstration, please visit youtube.com/steelcasetv

Up/Down Controller

OPERATING THE CONTROLLER

The controller has two buttons for user control.

 

Press and hold either the 

up

 or 

down

 button to 

reach the desired desk height.

 

The desk will continue to move up or down until 
the user releases the button or the maximum or 
minimum height is reached.

Note: 

The controller can be mounted in a fixed location on the left or right front 

edge of the desk.

Note: 

As a safety feature, the user must continuously hold down the button in 

order for the desk to move.

4 Preset Programmable Controller  

with Digital Display

OPERATING THE CONTROLLER

The controller has seven buttons for user 
control. Two of the buttons are the 

up

 and 

down

 buttons, controlling the movement of 

the desk. One of the buttons is the 

memory

 

button, which is used to set heights to be 
stored. The remaining four buttons are 
memory position buttons. The controller 
also has a digital display, which displays the 
numerical height of the desk (in inches or cm).

 

Press and hold either the 

up

 or 

down 

button to reach the desired height.

 

The desk will continue to move up or down until the user releases the button  
or the maximum or minimum height is reached.

 

To switch to a stored height in memory, use the four memory position buttons. 
Press the required memory position button and hold it down. The desk will move 
until it reaches the saved position. If you release the button before the saved 
position is reached, the desk will stop and the saved position will not be reached.

Содержание Migration SE Height-Adjustable Desk and Bench












Отзывы: