Steelcase Migration SE Height-Adjustable Desk and Bench Скачать руководство пользователя страница 2

Max.

Min.

>1"

(25mm)

>1"

(25mm)

>1"

(25mm)

Crush Hazard – Keep Clear 

RISK OF SERIOUS INJURY OR DEATH 

Raising or lowering desk can trap or crush body parts.

DO NOT OPERATE THIS EQUIPMENT UNLESS PROPERLY 
TRAINED. 

Read this guide first.

DO NOT ALLOW USE BY CHILDREN 

or people unable to 

understand the risks and to safely adjust desk height.

MAINTAIN >1" (25 mm) GAP ABOVE OBJECTS ON DESK 
AT MAX HEIGHT, AND BETWEEN DESK AND ADJACENT 
OBJECTS. 

Locate desk, accessories and nearby objects to allow 

movement of desktop through full range without pulling cords, 
trapping body parts or colliding with anything (shelves, electrical 
plugs and cords, door knobs, window sills, storage cabinets, etc.).

DO NOT PLACE FEET OR OTHER BODY PARTS ON CABINETS 
OR OBJECTS BELOW DESKTOP.

X

NO CHILDREN

DO NOT STAND ON THIS PRODUCT. USE ONLY AS INTENDED.

Regularly inspect for damage or broken parts and loose fasteners (screws, etc.).  
If any of these conditions exist, remove from service immediately. Repairs are to be 
made using only factory authorized parts and methods. For information on furniture 
maintenance, or to report furniture which requires service, call Steelcase  
toll-free at 1.888.783.3522. 

FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN PROPERTY 
DAMAGE OR PERSONAL INJURY.

Содержание Migration SE Height-Adjustable Desk and Bench












Отзывы: