Steelcase Migration Bench desk, Руководство пользователя

Страница: 25 / 35

Operation and settings
Migration Manual -en- 2019 Page 25 of 35
Adjusting the desk height with the Memory control panel
Before performing the height adjustment, you must ensure that:
•
The display of the control panel does not show an error message (see Error messages displayed on the
Memory control panel).
•
No one is in the lifting range. No objects (such as open doors or windows) are in or protrude into the lifting
range.
•
There are no objects in the lift range of the lift column.
•
No one is on the desk.
•
The maximum permissible load capacity of the desk is not exceeded (see Technical data ).
•
No heavy loads are on the desktop. Heavy loads make the height adjustment more difficult.
•
The desktop is level. If the floor is uneven, align the desktop with the adjusting screws on the feet.
Ensure that the connecting cables of devices on the desk are long enough.

Press the "Up" or "Down" button.
A lift movement takes place only:
•
As long as you press the appropriate button,
•
As long as the maximum load (approx. 50 kg) is not exceeded.
The desk movement is starting!
CAUTION! The desk movement takes place at a speed of approx. 4 cm/s.
ATTENTION
Risk of damage to the desktop!
If desktop movement occurs on one side only or unevenly:

Release the button immediately so that movement stops.

Determine the cause using the fault-finding table (see Error messages
displayed on the Memory control panel).

Consult a service technician if necessary.