Setup and assembly
Migration Manual -en- 2019
Page 16 of 35
Setup and assembly
Safety-relevant information
WARNING
Danger of crushing and shearing!
Body parts or objects could be crushed or sheared off as a result of the
electrical height adjustment process.
In the entire lift range, maintain adequate lateral clearance (at least 2.5 cm)
to all surrounding objects, walls, etc.
Set up the desk in such a manner that sufficient space for the complete lift
movement and space for maintenance work is ensured.
WARNING
Risk of injury or damage!
The fastening screws could tear if the desk is lifted by the desktop or the
attached components.
Always take hold of the desk at the underframe to transport or move it.
Checking the delivery contents
After unpacking, check the product immediately for damage sustained during transportation and for
completeness; inform the manufacturer of any damage as soon as possible.
Disposing of the packaging material
The packaging includes the following:
•
Outer packaging made of cardboard
•
Shrink film made of polyethylene (PE)
•
Bubble wrap made of polyethylene (PE)
•
Edge protectors made of cardboard or polyethylene (PE)
•
Corner protectors made of polyethylene (PE).
These materials are recyclable. If assembled by Steelcase or an assembly company authorised by Steelcase,
the manufacturer will dispose of the packaging. If you assemble the desk yourself, please ensure that the
packaging material is correctly sorted by type and recycled.
Electrical connection
Check the electrical equipment of the desk. Rectify defects such as loose connections and damaged cables
immediately.
Attach or detach connectors only when the equipment is de-energised.
The desk plug must be easily accessible at all times.
Information concerning the connections for the motor controller can be found in the user manual,
SMARTneo firmware version 1.0, at www.logicdata.at.
