Operation and settings
Migration Manual -en- 2019
Page 24 of 35
Memory control panel (optional)
Prior to placing the desk in service it is necessary to perform a manual reset.
Figure 9 Buttons and display on
Memory
control panel
1
"Down" button
2
"Up" button
3
Display
4
"STORE" button
5
"MEMORY keypad 1 / 2 / 3 / 4"
Manuel reset via Memory control panel
WARNING
Danger of crushing and shearing!
The software-supported stopping device is not active during the reset
movement and for the end position calibration.
Keep a sufficient distance from the desk during the reset movement.
Press and hold the "Down" button until the lower end position (programmed
desktop position) is reached.
Release the "Down" button.
Again, press and hold the "Down" button for approx. 5 s.
The desktop moves to the lower end position.
Release the "Down" button. The system is now ready for operation.
If the button is released before the process is completely concluded, the manual reset process will be
interrupted and must be restarted.
