Transport and storage
Migration Manual -en- 2019
Page 15 of 35
Transport and storage
Safety-relevant information
WARNING
Injury and damage possible!
The fastening screws could tear if the desk is lifted by the desktop or the
attached components.
Always take hold of the desk at the underframe to transport or move it.
ATTENTION
Risk of damage to lift mechanism!
The values saved in the controller do not match the values for another
desk.
After dismantling the desk for transport reasons for example:
Always reattach the two side frames to the associated desktop cross-
member of the same desk.
Comply with the separate assembly instructions in this regard.
Interim storage
If the desk must be temporarily stored before installation, the following conditions must be fulfilled:
•
Intact transport packaging
•
The floor must have sufficient load-bearing capacity
•
Dry floor
•
Level placement surface
•
Temperature range: +5 °C to +35 °C.
•
Max. rel. humidity: 80 %
