Setup and assembly
Migration Manual -en- 2019
Page 17 of 35
Setting up the desk
Setup and use of the product requires detailed planning. For this Steelcase offers the services of a separate
planning department.
The partially assembled components of the
Migration
desk are generally supplied via retailers or directly from
the manufacturer.
The setup location must meet the following requirements:
•
The floor must have sufficient load-bearing capacity
•
Level placement surface
•
Temperature range: +5 °C to +40 °C.
•
Max. rel. humidity: 80 %
Assembling the desk
Steelcase recommends having the installation performed by the retailer or by a qualified installation company.
Height levelling
To compensate for uneven ground, you can raise each foot by up to 1.0 cm with an adjusting screw.
For a desk that has already been assembled: before levelling, remove any objects from the desktop.
Figure 4
Migration
height levelling /
Migration Bench
height levelling
Figure 5
Migration
height levelling /
Migration Bench
height levelling
1
Adjusting screw
1
Adjusting screw
Turn the adjusting screw until the height is levelled.
