Steel City 50155C, Руководство пользователя

Страница: 18 / 32

16
ADJUSTMENTS
TABLE TILT
The table on your bandsaw is designed to tilt up to 45
degrees to the right and up to 3 degrees to the left.
To tilt the table:
1.
2.
3.
4.
5.
Loosen both lock knobs (A) on the underside of
the table. SEE FIG.15 (only one knob shown).
Tilt the table to the right noting that the scale (B)
shows the angle of the table.
Retighten lock knobs when desired angle is
achieved.
In order to tilt the table to the left and/or set the
table at 90 degrees, you will need to adjust the
stopping bolt under the table
(A) . To set the stop
for the right tilting of the table, adjust (B) . SEE
FIG.16
FIG.17 shows square on table and against saw
blade (C) .
FIG.15
A
B
B
A
FIG.17 FIG.16
C