Steel City 50155C, Руководство пользователя

Страница: 14 / 32

12
ASSEMBLY
MAKE CERTAIN THAT THE SAW IS DISCONNECT-
ED FROM THE POWER SOURCE.
WARNING
!
ATTACHING MOBILE BASE
The mobile base consists of one rotating adjustable
caster wheel and two stationary wheels that allows you
to move the bandsaw around your shop with ease.
To install:
FIG.1 FIG.2
1.
2.
3.
4.
Remove the 3 mounting bolts that hold the bandsaw to the metal pallet. Lay the cardboard carton on the floor in a flat
position. With assitance, tip the bandsaw onto the cardboard with the spine side down.
SEE FIG.1 .
The stationary wheels have already been attached (A) . Check to see that the bolts are tight in case they came loose
in transport. SEE FIG.1 .
Fasten the caster wheel assembly (FIG.1 (B)) to the base using the two carriage bolts and nuts (see mobility kit
parts list on page 10) .
Attach the leveling feet ( C) by screwing the studs into the threaded holes from the bottom of the base. Do not tighten
nuts (D) at this time as the feet will need to be adjusted to match the location of the bandsaw. SEE FIG.2 .
A
B
C
D