Steca StecaGrid 2010+ Master, Инструкция по установке и эксплуатации

Страница: 39 / 84

39
734.843 | 10.48
EN
4.9 Navigating the display
Button (A) Escape:
Use this button to return to the main menu from the individual menu
items and to exit the setup menu.
Buttons (B) and (C) Arrow buttons Up and Down:
Use these buttons to run through the individual menu items or to carry
out settings in the setup menu.
Button (D) Enter:
Use this button to go to another menu level or to confirm a setting in
the setup menu.
As soon as a voltage is present on the AC side of the inverter for the first time,
you must select the language desired. The following languages can be selected:
German, English, French, Spanish and Dutch. The following display then appears
in the selected language:
‘Warning: country selection: only permitted once, see manual’
Press the Enter button to continue.
In this display the country can be selected. Use the arrow buttons to select
the country desired. Then press the Enter button to confirm your selection.
After you have selected the country, the setting is shown and you are asked
to confirm the setting. If you choose the wrong country you can press the
Escape button to return to the selection list. If the country chosen is cor-
rect, confirm the selection using the Enter button. The normal display now
appears.
It is possible to switch the inverter on and off by hand. The inverter is
switched on as standard when delivered. This setting can be changed in
menu 2-1 of the inverter.
Press the Enter button to continue.
Use the arrow buttons to go to menu and press the Enter button once
again.
After this, set the correct date and time. The yields in the inverter data
logger will not be correctly logged until you have completed this task. Use
the Escape button to return to the main menu. Press the Arrow button
until the arrow is in front of the word „Settings“ and then press the Enter
button.













1
2
3
4
5
6
A D
B
C