Stealth Products IDHBT500, Инструкция по установке

Страница: 14 / 64

6
System Requirements 8.0
Control System Overview 8.4
The i-Drive system operates in different modes, including RUN & CONFIG
modes. In RUN mode, no settings changes are allowed and computed outputs
are sent to the chair.
In CONFIG mode, settings changes are allowed and computed outputs are not
sent to the chair. The i-Drive system automatically switches to CONFIG mode if
the system voltage falls below 10 volts to prevent unwanted input activations
due to low voltage.
The USB cable enables an external device to communicate with i-Drive with the
use of a virtual communications port. There is no authentication requirement to
gain access.
The Bluetooth interface enables an external device to communicate with the
i-Drive via a secure Bluetooth connection. Authentication required to gain
access.
Mode Accepts Config Changes Wheelchair Output
RUN No Yes
CONFIG Yes No