Stealth Cam STC-G45NGMAX, Инструкция по эксплуатации

Страница: 18 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
18
CAMERA PROGRAMMING
TEST – This is the final switch setting, and is used to test the camera’s PIR sensor coverage area.
When moved to this setting the display will display:
TEST
VXX.XX.XX
The number listed at the bottom of the display shows the current
version of the firmware that is installed on the camera. The first two
XX indicates which model version you have and the last four XX.XX
indicates the firmware version. This is very important information
when performing an update. Please check the Stealth Cam website to
see if any firmware updates are available.
When in this mode the Test Mode light will blink green when the camera detects motion. This
will help determine if the camera is positioned at a location that will sense motion as it passes by
causing the camera to activate in its PIR and video mode.