Stealth Cam STC-G45NGMAX, Инструкция по эксплуатации

Страница: 16 / 54

www.stealthcam.com Page
877-­‐269-­‐8490
16
CAMERA PROGRAMMING -­‐ CUSTOM (CONT)
!
LATITUDE – 000.000000N (default): This setting is used for the GEO-­‐TAG of the camera. It
will not be displayed on the images directly, but rather on the background image
information. The coordinates can be changed from 000.000000 to 179.999999 and either N
(North) or S (South). With this option blinking, use the UP or DOWN arrow buttons to
change the initial number blinking. Once the number is correct use the RIGHT arrow button
to continue to the next value. Repeat until the final desired numeric sequence is entered.
!
LONGITUDE – 000.000000E (default): This setting is used for the GEO-­‐TAG of the camera. It
will not be displayed on the images directly, but rather on the background image
information. The coordinates can be changed from 000.000000 to 179.999999 and either E
(East) or W (West). With this option blinking, use the UP or DOWN arrow buttons to change
the initial number blinking. Once the number is correct use the RIGHT arrow button to
continue to the next value. Repeat until the final desired numeric sequence is entered.
!
FACTORY RESET – NO (default): This setting is used to reset the camera to its factory
defaults. With this option blinking, pressing the UP or DOWN arrow buttons will cause the
camera to cycle between the two options of NO or YES. When the YES option is chosen and
the ENTER button is press the camera will default all configurations made up to this point.
!
SECURITY KEY – OFF (default): This setting allows the owner of the camera to program a
four (4) character alphanumeric code to keep unauthorized people from accessing their
camera settings. To turn this feature on press the ENTER button, then press the UP or
DOWN arrow buttons to change to the YES option. Once chosen, press the ENTER button
and the camera will now engage this feature. Pressing the DOWN arrow key will move to
the security key configuration.