Slide connector S39 into profile
L04D until it snaps into place.
Repeat to make two sets.
4.5B
Lay out profiles L04D so the holes are at the same position. Slide short side of
connector S01 into channel of profile, lining the last hole in S01 with the hole
on profile L04D. Secure with S02 screw.
Slide connector S03 into profile L04B until it clicks into place.
Attach profiles L04B and L04C to profile L03A by sliding the long sides of connectors S01 into the
channels. The last hole of connector S01 lines up with the holes in the profiles.
Secure with two S02 screws. Repeat to make two sets.
S03
L04B
4.7B
L03A
L04C
IMPORTANT: Connector S03 rests
on top of connector S01. S02 screw
secures S03 to profile L04B.
QTY
QTY
2
#L04C
Profile
Screw
4
#S02
QTY
2
2
#S01
#S02
QTY
2
#L04D
QTY
2
#S39
Connector
Connector
Profile
4.5A
4.7A
4.6
29 of 55
www.stcny.com
Connector S39 CLICKS into place.
Connector S03 CLICKS into place.
There is only one way to properly fasten connectors into profiles. Line up parts
first to ensure correct placement. Slide connectors until they CLICK securely into
profile. Use WD40 or liquid soap if pieces do not easily slide together. Wear gloves.
!
S39
L04D
S01
L03A
L04C
L04B
S03
S02
S02
S01
S02
QTY
QTY
2
#L04B
Profile
Connector
2
#S03
S03
L04B
S01
L04D
S39
