Insert long side of cable connector S06 at an angle
into profile channel L02B with HOOK FACING UP.
Slide connector to other side of channel.
Use hex key to securely tighten and
hold in place.
Attach one side of short cable S16 to hook on S06 and lace under profile L04A. Attach other side of
cable to a second S06 cable connector and with hook facing center, insert into profile channel L01K.
Push the S06 connector towards center until profile corners are square and cable is tight. Use hex key
to securely tighten and hold in place.
Repeat step 3.10 inserting cable connectors S06
into profiles L02A and L01L. Cable rests next
to panel Y5, under profile L04A. Slide
connector until profile corners are square
and cable is tight. Use hex key to securely
tighten second connector and hold in place.
3.10A
3.10B
3.11
2
#S16
#S06
QTY
QTY
4
Cable Connector
Cable
QTY
1
Hex Key
26 of 55
www.stcny.com
NOTE: ALL VIEWS ARE FROM INSIDE.
IMPORTANT: Make sure all corners
are squared at 90 degrees.
IMPORTANT: Make sure all corners
are squared at 90 degrees.
L01K
L01K
L06K
L01L
L01L
L06A
Y5
L06K
L06A
L02B
L01K
L01L
Y6
L02A
L04A
L04A
L01K
L01L
Y6
Y5
L06K
L06A
L02A
L02B
