ENGLISH
29
29
Before using the machine familiarize yourself
with the achine making sure you know
perfectly well where all the ontrols can be
found as well as all security devices and ow all
these should be used. If you are not an expert user we
recommend you start with some simple jobs and if
possible, under the supervision of an expert user.
The cutting tool of this machine is sharp. Using
this machine inadequately could be dangerous.
Attention! Only lend this machine to people
who are familiarized with this type of machine
and know how to use it. Always lend the
instruction manual with the machine so that
the new user reads it and understand it prior to
carrying out any work. This machine is dangerous in
untrained hands.
PERSONAL SECURITY
Be alert and vigilant and use common sense when using
the machine.
Never use this machine without the security elements.
Do not modify the machine controls.
Avoid the inhalation of exhaust fumes. This
machine expels dangerous gases such as
carbon monoxide that can cause dizziness and
even death.
Do not use the machine when you are tired or under the
influence of drugs, alcohol or medicines. One moment´s
distraction can cause serious personal injury.
Never use this machine if any part of the machine is
damaged.
Never operate the machine with defective guards, or
without safety devices.
Do not modify the controls of the machine or the speed
engine regulators.
Remove all tools from the working area before starting the
machine. Any tools left in the working area can be touched
by any moving part of the machine and be hurled causing
personal damages.
Do not overstretch. Maintain your feet well placed on the
floor and maintain a good equilibrium at all times.
Always maintain proper foot support and run the machine
only when standing on a fixed surface, safe and stable.
Or unstable sliding surfaces may cause loss of balance or
control of the machine.
Keep all parts of body away from the cutting parts and
other moving parts when the machine is running.
Before start up, make sure that the cutting element is not
in contact with any object. One small lapse in attention
can cause your clothes or any body part to be caught by
the cutting device.
Hold the machine always with your right hand on the back
handle and your left hand on the front handle.
Holding the machine with your hands switched, increases
the risk of corporal damage and should never be done.
Be extremely careful when cutting shrubs and young
trees. Thin materials can be projected towards the end
user or could make you lose your equilibrium.
If you are a novice user, we recommend you have a
minimum practice on a flat surface.
If the machine vibrates abnormally, stop the engine and
inspect the machine looking for the possible cause and
repair it. If you do not find the motive, take the machine to
your nearest after sales dealer.
Do not touch the exhaust of the machine or the engine
when stopping the engine. The exhaust will be hot some
time after turning the engine off. The machine heats up
when functioning and will remain hot for some time after
stopping the engine.
Do not leave the machine running unattended. If you must
leave the machine unattended shut off the engine, wait
until the cutting device stops and unplug the spark plug
wire.
Always carry the machine with the motor off, with the
machine hanging from the front handle and use the blade
guard installed keeping the machine always high so it
does not touch the ground Do not try to remove cuttings
from the work area or from the blade when the machine is
in movement.
Make sure the machine has stopped completely before
carrying out any maintenance or cleaning work on the
machine and the working area.
Do not handle the machine by the cutting device. The
cutting device has sharp edges that can hurt yourself.
Store in a place out of reach of children.
CLOTHING AND SECURITY APPAREL
Dress adequately. Do not wear loose clothing or jewellery.
Maintain your hair, your clothing and gloves well clear of
any moving parts. Loose clothing, jewellery or long hair
can get tangled on the moving parts.
Do not use the machine barefoot or wearing sandals.
Always use resistant shoes and long trousers.
When using this machine make use of the following
equipment:
Security glasses or protective mask.
Ear protection.
Working gloves.
Non slippery boots.
We recommend you use long trousers to reduce risk of
personal injury should any projectile be hurled by any
moving part of the machine.
The correct use of security equipment will reduce the risk
of personal injury.
