Status
Pro
–
T250 Instruction manual
9
OPERATION
Simply explained, the laser beam of the T250 is housed in a tube. Four screws are
attached to this tube, two on the side and two on top. This arrangement enables alignment
of the laser angle as well as the parallel shift in both the vertical and the horizontal plane.
Example:
1)
If the Y1 screw is moved downwards
(screwed in) then the angle of the laser
beam will also slope downwards
2)
If both Y1 and Y2 are moved downwards
(screwed in) then the laser laser beam will
move parallelly downwards = parallel shift
The adjustments in the horizontal plane
(X1 & X2) are carried out in exactly the
same way.
X 1
X 2
Y 1
Y 1
Y 1
Y 2
Y 2
