Status
Pro
–
T250 Instruction manual
5
SAFETY INSTRUCTIONS
1.5 Calibration
To guarantee measurement accuracy, and reliable operation of your
Status Pro Measure ment System, it is of utmost importance that the
recommended Service Intervals be ad hered to. The System should be
checked for serviceability, and recalibrated by the Status Pro workshops
every 12 months.
Within the scope of the service checks, the complete system will also be examined for
possible wear or damage, as well as receiving any software updates. The date of the next
service check for your equipment is stamped on the Status Pro calibration sticker.
To ensure trouble-free processing of the service and calibration checks, simply use
the form you will find using the following link:
www.statuspro.com/machine_geometry/service_support/calibration_repair/
1.6 Liability Exclusion
The Status Pro GmbH does not accept responsibility for damage incurred through incor-
rect use or handling of the equipment. To ensure correct usage, a founded knowledge of
the equipment is essential. It is of the utmost importance that you read and understand the
Handbook!
No responsibility will be accepted for damage incurred through ignorance or disregarding
of the operating instructions.
